Mailman
The other night I installed mailman on my server. I integrated it into the apache configuration and restarted that. The mailman web interface became available as expected.

I used the web interface to subscribe to the one list I had set up and I received an email asking me to confirm my subscription. I went to the included link, and all seemed to be good.

Another person joined the list successfully, then sent an email to the list. This email never arrived in her inbox. She told me about it, and I checked only to find I did not have a copy either. I sent a mail to the list and promptly received a message saying that [listname] was not a valid recipient at the domain.

That's when I realized I had forgotten to tell the mail server (postfix) about mailman. I had told apache about mailman, and mailman about postfix, but not postfix about mailman.

I used mailman to create an alias database for its single list, then updated postfix's configuration to use that as one of its alias maps. All seems to be working now.

In conclusion, I learned two things. One is always test your configuration before telling people it's ready. The other is, "I'm an idiot."

[/unix] [permanent link]

Gmail and mutt
I like mutt. Of all the mail clients I've used over the years, it sucks the least. It works well with my mail server.

Despite having my own domain and mail server, I still use gmail for certain things; things I don't mind being retained for 3 years after I delete them, or more specifically, things I want retained for 3 years after I delete them.

I don't like the gmail web interface. I find checking my gmail to be annoying because of this. I remembered gmail offering POP and IMAP. I figured I could use that to get my gmail. Shouldn't be too hard right?

A quick search of Mr. Yahoo and Mr. Google gave me two good starting points: Lifehacker.com and MattCutts.com.

I read the sites and the getmail man page and figured out what I needed to do. First I enabled IMAP for my gmail account. Next, I created the .getmail directory in my home directory then created a getmailrc file there. I want all gmail mail to be delivered to a specific mbox file without going through my normal mail delivery channels. The contents of the getmailrc file are quite simple:

[retriever]
type = SimpleIMAPSSLRetriever
server = imap.gmail.com
username = username@gmail.com
password = usernamespasswordgoeshere
mailboxes = ("inbox",)

[destination]
type = Mboxrd
path = /usr/home/mforde/Mail/GMAIL

The retriever section defines how getmail will retrieve the mail. In this case it uses IMAP over SSL to connect to imap.gmail.com. The mailboxes setting can be used to specify only certain gmail labels to retrieve, but I want anything in the inbox.

The destination section tells getmail what to do with the mail once it has grabbed it from gmail. This configuration dumps it into an mbox file I've named GMAIL.

I chose IMAP over POP because of the slightly-less-than-documented "feature" of gmail only allowing 99 messages at a time over POP.

So to get the initial batch of 7000+ emails, I ran

> getmail -vvv -l 

to get verbose output and to leave messages on the gmail server. When that was done I pointed mutt at the GMAIL mbox and like magic, there was my gmail, organized nicely in my terminal.

Now, I want to check to get the latest mail fairly often, and I don't want to download messages already copied over. To accomplish this, I added a crontab to run every 10 minutes and invoke

getmail -l -n -q

This tells getmail to leave copies on the server, only get new messages it hasn't already retrieved, and be quiet about it.

This has worked out well for me. If you're interested in setting up something like this, I highly recommend reading the article at matcutts.com. That article also links to several sample getmailrc files.

[/unix] [permanent link]

Happy Anniversary
The Twilight Zone premiered 50 years ago tonight. Slashdot has a bit about it.

[/musings] [permanent link]

2010 New Jersey Marathon
I was registered for today's NJ Marathon in Long Branch. I lost a few weeks in training due to some IT-band issues, and earlier this week was stricken with a bout of bronchitis.

I got down there today, and 30 minutes before the race start I did a quick quarter mile and decided I wasn't over the bronchitis enough to run a marathon today. It was difficult for me to be there as the race started, watching my chance at reaching my goals disappear. As the morning went on and clouds disappeared and the temperature rose, my thoughts changed.

Not running today was probably the best and hardest decision I've made in a while. Often the right choices in life are not the easiest to choose, no matter the circumstances.

[/running] [permanent link]

"Why the hell don't the plugins have proper documentation"
I had to pick up something in Fair Lawn for a friend this evening. It was later in the evening, well after rush hour but there was still a good amount of time before the sun went down so I decided to take the DeLorean out.

I got her out on Rt 80 and she handled beautifully. The turns on the entrance and exit ramps felt better than in my Pontiac. I was a little nervous about over-steering because of the rear mounted engine, but it wasn't an issue.

When I arrived at my destination, I got some looks from a woman walking her dog and some guys across the street working on something in their garage/driveway. I had a bit of an issue getting back on to 80 due to a construction vehicle and an a-hole in a BMW, but everything else was fine. I'm getting much better at driving it.

On the way home at the 80/23/46 interchange a minivan pulled up beside me and beeped their horn. I looked over and they gave me a thumbs up.

It was most triumphant.

[/dmc] [permanent link]

It exists
As part of the DeLorean's restoration, I've been considering a backlit dash. I had considered sticking with the stock dash with the white light bulb in front of the gauges, but I thought a red backlit display would be better for night vision.

Then came the issue of whether or not something like that exists. Turns out it does. Speed Hut carries a line of customizable gauges for the DMC-12 as part of the EL-Glo line.

[/dmc] [permanent link]

1453995544
https://m.youtube.com/watch?v=P3hY1eagq88

==================================================================
This mobile text message is brought to you by AT&T

[/mobile] [permanent link]

NJ Governor Endorsement
I officially endorse anyone who is not Jon Corzine.

[/politics] [permanent link]

FreeBSD Unix on Dell Precision M4800
I installed FreeBSD 10.3 on the laptop I recently acquired and almost eveything worked out of the box. The gigabit ethernet and wi-fi coards worked fine and by setting the BIOS to discrete graphics only, the nVidia Quadro was recognized.

I installed the binary driver from nVidia, because they support FreeBSD because they're awesome like that. The nvidia-xconfig(1) program was useful to streamline the process of getting X.org to use the Quadro.

There were a few things that did need some tewaking though. First there's the sound card. Because the quadro supports HDMI (in addition to VGA and DisplayPort), it includes an HDA-compliant sound card. This card is recognized before the primary HDA-compliant sound card in the machine, the one that's actually connected to the speakers.

I did some research and there were some suggestions about using sysctl(8) to control soundcard GPIO pins to connect the nVidia sound device to the speackers but what ultimately worked was using sysctl(8) to change the default primary sound device to the dedicated card. There were a few ways to make this happen but the one I found that actually worked was to place sysctl(8) command lines in /etc/rc.local.

First I found the device I wanted as the default:

mforde@gaz:~> cat /dev/sndstat 
Installed devices:
pcm0:  (play) default
pcm1:  (play)
pcm2:  (play) 
pcm3:  (play)

Device pcm2 was the one I wanted so I added the following lines to /etc/rc.local

sysctl hw.snd.default_unit=2
sysctl hw.snd.default_auto=2

Now when boot completes pcm2 is set to my default and sound "just works" and sndstat shows pcm2 as the default.

I found ACPI support has some weirdness as ACPI support often does. What I found was that Suspend works from console, but resume doesn't... HOWEVER After I start X ACPI suspend and resume work just fine. Normally I prefer to boot into a console and only start X if I really need it, but because I want suspend and resume to work "by default" I've enabled X to start at boot by allowing the xdm console in /etc/ttys.

But this had one last issue. See, when manually starting X, I added the -dpi 143 option to get graphics and text to be appropriately sized for my screen. XDM needed to know about this.

This probably wasn't the best place to do it, but I edited /usr/local/lib/X11/xdm/XServers and modified the call to X(7) to add the -dpi 143 option. Now when Xdm loads at start up, the DPI is set correctly.

The function keys for adjusting the screen brightness don't work; however, xbacklight(1) works just fine. Similarly the volume keys don't work but I can adjust the volume quite easily with aumix(1).

I've submitted my dmesg output to NYCBUG's dmesgd repository.

I suppose I've posted this for two reasons. The first is so I have a record of how I eventually got these little things working in case I have to do it again. The second is in case anyone has similar issues with their hardware; if they happen to stumble upon this, it might give them some hints.

[/unix] [permanent link]